GAGas
Gas fitting
Gas appliance installs and changeovers, leak tested and commissioned before anything is signed off. Instantaneous gas hot water is on the published job record.
In detail
Gas work is the part of plumbing with the least room for interpretation. The line is sized for the appliance load, the run is supported and protected, and the whole installation is pressure tested for leaks before an appliance is lit.
Changeovers are where problems hide. An existing line that carried an old low-input appliance will not necessarily carry a new high-input one, and connecting it anyway is how you end up with an appliance that underperforms or a system that is unsafe.
Commissioning means the appliance is checked running, not just connected.
From a completed job
Instantaneous hot water installed and commissioned as part of a Greenvale appliance fit-off that also included a rainwater pump and RPZ valve.
How a job runs
Four steps, start to finish
Tell us what is happening
A message with the suburb, the problem and a photo. Most jobs can be narrowed down to one or two likely causes before anyone gets in a van.
Looked at on site
Quotes get worked out against your actual setup, not a price list. What is behind the wall changes the job, so the job gets priced after someone has seen it.
Price agreed before work starts
The price is agreed up front. If something genuinely unexpected turns up once things are open, work stops and you get a message before it continues.
Installed, tested, commissioned
Pipework tested before it is covered, appliances checked running rather than just connected, and the site left clean. Captions on completed jobs regularly note testing and commissioning.
Coverage
Gas fitting across Melbourne
Suburbs in brass have a completed job on record. The rest are inside the regular service area.
- Dallas
- Melbourne
- Glenroy(job on record)
- Airport West(job on record)
- Ascot Vale(job on record)
- Greenvale(job on record)
- Essendon(job on record)
- Brighton Beach(job on record)
- Moonee Ponds
- Niddrie
- Strathmore
- Keilor East
- Pascoe Vale
- Coburg
- Brunswick
- Tullamarine
- Gladstone Park
- Broadmeadows
- Roxburgh Park
- Craigieburn
- Flemington
- Kensington
Questions
Before you book
Send the suburb, a description of the job and a photo if you can. Most jobs get narrowed down before anyone attends, then the price is confirmed on site and agreed before work starts.
Yes. Their public positioning covers residential and commercial plumbing, drainage, gas fitting and maintenance. Ask with the suburb and what is happening.
The quoted price is agreed before work starts and covers the labour and materials for that scope. If something genuinely unexpected turns up once things are open, work stops and you get a message before it continues.
Also handled
All services
DRDrainage and sewerDrain repositioning, sewer branches and boundary trap connections, set to the correct falls and tested before the trench is closed.
HWHot water systemsStorage and instantaneous hot water supplied, installed and commissioned, with the tempering valve set and the old unit taken away.
PRWater pressure and valvesPressure testing and pressure limiting valves, because mains pressure well above 500 kPa quietly destroys everything downstream of it.
BFBackflow preventionRPZ and backflow device installation, testing and commissioning, so the drinking water supply stays separated from everything else on site.
Next step
Need gas fitting looked at?
Tell us the suburb and what is happening. Work on record in 6 suburbs across Melbourne and the north west.